Wednesday, 01 April 2020 07:57
ULTRA 80: a new bar feeder from LNS Group
The upcoming market launch from the Swiss specialist is more than just an evolution of its Sprint range. The ULTRA 80 is much more akin to a real revolution in the field of bar feeder systems. An oversized base frame…
Read 225 times
Published in
Production
Wednesday, 01 April 2020 07:55
Weld Purging of Heat-Treated Pipework
Some high strength steels need to be pre-heated prior to welding and may also require a post-weld heat-treatment. Both pre- and post- weld heat treatment is necessary to prevent cracking, but temperatures up to 300ºC (572ºF) must be maintained for…
Read 293 times
Published in
Production
Wednesday, 01 April 2020 07:48
New EnDOtec SAFE-HARD 600 wire range from Castolin Eutectic – Inspired by safety, engineered for performance
After two years of investigation, laboratory and field testing, Safe-Hard 600 arrives at the market to provide better performance and absolutely zero risks of CrVI emissions coming from the welding material. Inspired by Safety – We are striving for the elimination…
Read 243 times
Published in
Production
Thursday, 12 March 2020 12:15
Dealing with radiation interference in radiometric level measurements
The effects of interference radiation on radiometric measurements can be considerable and must therefore be controlled. As it is neither predictable when interference radiation will be present, nor how much the impact of a distant NDT testing on a nucleonic…
Read 330 times
Published in
Production
Thursday, 12 March 2020 11:32
Europe’s proposed carbon border adjustment could hold the key to breakthrough on CO2 emissions reduction
ArcelorMittal today calls for member states and MEPs to support the introduction of a carbon border adjustment (CBA), as part of the European Commission’s €1 trillion Green Deal, aimed at making the bloc carbon neutral by 2050. ArcelorMittal today calls…
Read 367 times
Published in
Production
Thursday, 12 March 2020 08:51
Amazon Filters ‘set for the future’ after metalworking investment
One of Europe’s leading filter manufacturers is poised for more growth with the opening of a 12,500 sq ft (1,160 sq m) metalwork facility. Amazon Filters’ decision to in-source the bulk of its large-scale manufacturing capability will increase capacity and…
Read 348 times
Published in
Production
Wednesday, 11 March 2020 15:15
Magnetic encoder system with Drive-Cliq interface from Balluff
The BML absolute magnetic encoder in the SGA series stands out in any application where high absolute accuracy of position and end-of-travel is required. Comprehensive diagnostics functions ensure reliable operation and more efficient maintenance. With its Drive-Cliq interface the Balluff…
Read 410 times
Published in
Production
Wednesday, 11 March 2020 11:08
Konecranes Goliath strides to France
Konecranes and Chantiers de l’Atlantique, a shipyard in St. Nazaire, France, have signed a contract for the delivery of a Konecranes Goliath gantry crane. It will handle large ship blocks and panels over the dry dock, playing a leading role…
Read 364 times
Published in
Production
Wednesday, 11 March 2020 10:56
Swiss company extends the life of cam operated automatic lathes
Tens of thousands of traditional cam-operated automatic lathes are still tirelessly mass-producing precision parts for the watch, automotive, dentistry and electronic industries globally. Though the official support for these machining tools is limited, quality spare parts and tools are still…
Read 375 times
Published in
Production
Wednesday, 11 March 2020 10:53
British steel deal big win for industry but job cuts ‘heartbreaking’ says gmb
This deal is worth pursuing to safeguard UK steel for future generations, says GMB Union GMB Union says the British Steel/Jingye deal set to be signed off today is a big win for the industry – but job losses are…
Read 616 times
Published in
Production
Wednesday, 11 March 2020 10:45
UK Bearings Supplier Introduces Budget-Friendly Cam Follower Range
In a bid to combat the rising costs of branded bearings, a top UK bearings importer is introducing a budget-friendly range of imperial cam followers to the same dimensions as McGill bearings, made in the USA.. Midland Bearings, a West…
Read 271 times
Published in
Production
Wednesday, 11 March 2020 10:35
AMADA MIYACHI EUROPE announces MM-L300A Laser Weld Monitor
Amada Miyachi Europe announces the availability of the new MM-L300A Laser Weld Monitor. The compact MM-L300A is designed to detect welding defects and errors such as gaps between parts, missing parts, weld depth over-penetration, incorrect focus point and cover gas…
Read 286 times
Published in
Production
Wednesday, 11 March 2020 10:30
Outotec’s sustainability report 2019: Experts dedicated to sustainable partnerships
Outotec has published its 2019 sustainability report today. The online report themed ‘Experts dedicated to sustainable partnerships’ illustrates how Outotec’s experts motivated by our mission, ‘Sustainable use of Earth’s natural resources´ are dedicated to solving demanding challenges in co-operation with…
Read 292 times
Published in
Production
Wednesday, 11 March 2020 10:21
Headwall Partners Announces Publication -- 'Headwall 2020 Steel & Metals Growth Survey'
Headwall Partners LLC (“Headwall Partners” or “Headwall”), an independent corporate finance and strategic advisory firm primarily focused on the steel & metals industry, has just announced the publication of its fourth annual “Headwall Steel & Metals Growth Survey”. Headwall’s annual…
Read 595 times
Published in
Production
Wednesday, 11 March 2020 10:15
Sanderson Machines Announce Another World First
World leaders in innovative exhaust tube perforating systems, Sanderson Machines from New Zealand has announced the arrival of the revolutionary Sanderson TTP (Table Top Perforator). Often thought of as the dream of designers and the bane of engineers, our new…
Read 278 times
Published in
Production Equipment