Kent Corporation – North Royalton, Ohio USA announces an agreement with DieTronic Lubrication Systems of Sant’ Angelo Lodigiano, Italy, to become the exclusive North, South, and Central American representative for the companies’ line of antirust machinery. DieTronic, a leading manufacturer of lubrication systems in Europe, chose Kent Corporation because of their experience and sustained success in the tube and pipe industry.

2015-07-22 093916DieTronics’ product line consists of antirust machinery for the tube and pipe and stamping industries, where they currently have over 200 machines in operation worldwide! Their innovative LCP Antirust machine enables in-line application of protective oil onto the surface of pipes & profiles. Oil is applied proportionally to mill speed by the encoder feedback circuit which measures line speed and adjusts oil feed as set in g/m2. This allows a controlled amount of protective oil to be applied consistently to the pipe or profile. The operator interface is done through a 5” touchscreen input which enables setting and formulation of parameters for quantity of oil, product dimensions and/or shape, number of spray nozzles used, and temperature of the heating system. The machine also offers an option for an additional aspiration system designed to vacuum excess mist emitted from the spray nozzles, preventing hazardous fumes from entering the work environment.

Kent Corporation has been providing quality entry equipment, strip end welders, accumulators, high speed cold saws and tube mill consumables to the tube mill, roll forming and stamping industry for more than 40 years. Kent has delivered over 6,000 pieces of equipment that are currently running successfully, with applications that vary from .008”(.2mm) to .750” (19mm) thick and from strip widths of 0.5” (12.7mm) to over 80” (2032mm wide).

If you would like more information on how Kent can help you with your equipment needs, please contact Dean Costello at 1-440-582-3400 Ext. 126, Fax 1-440-237-5368, Email: This email address is being protected from spambots. You need JavaScript enabled to view it. online at www.kenttesgo.com.

Published inProcessing

Kent Corporation has developed a new Burrmaster deburring machine to automatically deburr the ends of mitre cut and bent tubes. This machine, which can be used in many industries, was purchased by a major US manufacturer of exhaust systems. This is the company’s second system and they are now considering the purchase of a third.

2015-06-01 072002

This new Burrmaster machine allows the machine operator to control the machine completely from the push button station. The process begins when tube is loaded into the custom clamp fixture by the machine operator. The tube is then clamped and transferred across a spinning wide faced brush. The head of the spinning brush is also rotating simultaneously, this unique dual action movement gives a high quality and consistent finish around the complete periphery of the tube.

This machine is available with manual feed, automatic feed or can be fed by a robot.   It is capable of running round, square, shapes, tubes, bars and aluminum extrusions. Kent also supplies a complete line of double end automatic deburring machines.  Lastly, Kent offers a full line of tube end deburring brushes for Burrmaster and all other brands. For free test samples, please contact Kent Corp +1 440-237-1290 This email address is being protected from spambots. You need JavaScript enabled to view it..

Published inMachinery

The new SCF-90 cuts one to six tubes simultaneously, giving you extremely high cut rates, up to 11,000 per hour. The saw head cuts upward which leaves most chips below and requires less cutting force. The fully hydraulic helical saw head is very robust with minimal backlash. The saw blade is both variable and the saw head is proportional feed through the tube to optimize cut quality, blade life, and production rates. The tubes are fed via servo feed that ensures accuracy and enables up to 10 different lengths to be cut from a single stock length of tube. The main control panel automatically selects the most efficient settings based on the job that is typed in. All settings are very quick and automatically controlled at the panel.

kent bewo

As a total intelligent solution within your production process, the BEWO Quatro can be expanded with 100% compatible machines and systems for deburring, measuring, washing and stacking. The High Speed saw is capable of processing tubes from .315 outside diameter (8mm) to 3.500 outside diameter (90mm).   Kent will offer full sales, service and parts back-up for new and used BEWO machines in North America.

Kent Corporation has been providing quality entry equipment, strip end welders, accumulators, high speed cold saws and tube mill consumables to the tube mill, roll forming and stamping industry for more than 40 years. Kent has delivered over 6,000 pieces of equipment that are currently running successfully, with applications that vary from .008”(.2mm) to .750” (19mm) thick and from strip widths of 0.5” (12.7mm) to over 80” (2032mm wide).

If you would like more information on how Kent can help you with your equipment needs, please contact Dean Costello at 1-440-582-3400 Ext. 126, Fax 1-440-237-5368, Email: This email address is being protected from spambots. You need JavaScript enabled to view it. or online at www.kenttesgo.com. You can also contact our new state of the art facility in Monterrey, Mexico at +52-81-1334-0725 www.piecsa.mx

Published inProcessing

North Royalton, Ohio USA / Monterrey Mexico has recently commissioned two Large Horizontal Accumulators.

2014-09-29 103719 9

The customers, both respective leaders in their industry of O.C.T.G and Structural Steel, chose Kent based on their vast experience in Entry Equipment/Accumulators and superior technical features. The customers were looking for more storage to enable them to meet end weld times. The new accumulators will reduce downtime, scrap, and maintenance.   The machines were 100% made in the U.S.A.   The customer insisted on US built to maintain quality and availability of service and parts. The specifications of these machines are up to 48” (1219MM) wide x .640 (16.25MM) thick.  

Kent Corporation has been providing quality coil handling, end welding, accumulators, high speed cold saws and tube mill consumables to the tube mill, roll forming and stamping industry for more than 40 years. Kent has delivered over 6,000 pieces of equipment that are currently running successfully, with applications that vary from .008”(.2mm) to .750” (19mm) thick and from strip widths of 0.5” (12.7mm) to over 80” (2032mm wide).

If you would like more information on how Kent can help you with your coil handling applications please contact Dean Costello at 1-440-582-3400 Ext. 126, Fax 1-440-237-5368, Email: This email address is being protected from spambots. You need JavaScript enabled to view it. or online at www.kenttesgo.com. You can also contact our state of the art facility in Monterrey, Mexico at +52-81-1334-0725 or by visiting www.piecsa.mx. To contact our sales office in South America, email Guillermo Lopez at This email address is being protected from spambots. You need JavaScript enabled to view it..">This email address is being protected from spambots. You need JavaScript enabled to view it..

Published inProduction

2014-08-14 100626 kentKent Corporation announces an order for a new, high speed, hands free tube mill entry system. The system will handle strip widths from 2” (50.8mm) to 14” (355.6mm) and gauge from .030 (.76mm) to .175 (4.44mm).   

The automated entry will replace older equipment and reduce change over time while increasing safety.   Kent has recently supplied entry and accumulators down to 1” (25.4mm) wide strip by .008 (.2mm) and all the way up to 56” (1422.4mm) wide x .625 (15.87mm) thick.   Kent is the original designer and patent holder for the Floop ™ strip accumulator and has (5) types of accumulators.   Kent will offer which accumulator best suits the customer needs.   Kent also rebuilds existing entry and accumulators and can take older systems in on trade.  Some of the new features of the Kent accumulators are automatic tension control, AC motors and drives, upgraded PLC, new arbor designs to prevent over-fill, run empty option, along with many others.   Kent provides a full line of coil handling and entry equipment, coil end welders, strip accumulators, MTM tube mills and flying cut offs, tube recut saws (BEWO), deburring, washing and stacking machines.  Kent’s world headquarters is located in North Royalton Ohio, with plants and offices in Monterrey Mexico and Santiago Chile. 

Kent Corporation has been providing quality entry equipment, strip end welders, accumulators, high speed cold saws and tube mill consumables to the tube mill, roll forming and stamping industry for more than 40 years. Kent has delivered over 6,000 pieces of equipment that are currently running successfully, with applications that vary from .008”(.2mm) to .750” (19mm) thick and from strip widths of 0.5” (12.7mm) to over 80” (2032mm wide).

Published inProduction