All for Joomla All for Webmasters

Displaying items by tag: ESCO Tool

A portable, easy to operate pipe beveling tool that is designed to produce perfectly square and parallel bevels to help assure high-integrity welded joints has been introduced by Esco Tool of Holliston, Massachusetts, USA. 

wartmillhogThe Esco Wart MILLHOG® Portable Pipe Beveler mounts securely into the pipe I.D. using a self-centering draw rod assembly with a mandrel featuring expandable clamps.  Designed to create precise square and beveled pipe ends with ± 0.0254 mm accuracy, it has a 3-blade holder that can bevel, face, and bore any angle of end-prep, simultaneously, without using cutting fluids.

Ideal for highly alloyed materials or carbon steel, the Esco Wart MILLHOG® Portable Pipe Beveler runs at 98 RPM and incorporates robust construction with highly reliable dual-opposed taper roller bearings.  Suited for tube and pipe from 19.1 mm I.D. to 114.3 mm O.D., it is offered in pneumatic and electric motors.  A wide variety of TiN coated blades are available. 

The Esco Wart MILLHOG® Portable Pipe Beveler is priced from (US)$5,895.00 and is available for rent at (US) $200.00 per week. Esco will be exhibiting at Tube® Dusseldorf, Hall 1 Booth B75-20 from 30.03.2020 to 3.04.2020.

Published in Production
Tagged under

A boiler tube alignment fixture for fossil fuel power generation, biomass, gas turbine heat recovery steam generator (HRSG), paper mills, and waste to energy facilities that incorporate boiler tube panels has been introduced by Esco Tool of Holliston, Massachusetts, USA.


The Esco HOG TIE® Boiler Tube Weld Alignment Clamp Kit includes everything necessary to achieve accurate horizontal and vertical gap spacing to assure the proper gap for producing high-integrity boiler tube joint welds.  Providing a fast and easy way to speed boiler tube fit-up and reduce tube joint failures caused by misalignment, this tube alignment clamp is now offered with a safety lanyard to prevent dropping. 

Simple to use, one side of the Esco HOG TIE® Boiler Tube Weld Alignment Clamp has two through-holes and the other has threaded inserts which accept two bolts that draw them together; exposing the tube ends for tack welding before removal to finish the weld.  Kits come in 7 sizes for 31.8 mm to 82.55 mm O.D. tubes and include an impact wrench and socket, four 12.7 mm bolts, 2 spare through-hole inserts, 2 threaded inserts, and a metal case.

For more information contact:

ESCO Tool, a Unit of Esco Technologies, Inc.

Matthew Brennan, International Marketing Director

75 October Hill Rd.

Holliston, MA 01746

(508) 429-4441  FAX (508) 359-4145

e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it. 

Published in Production
Tagged under

By clicking “Accept All Cookies”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage. Site Terms and conditions