Displaying items by tag: Huntingdon

Wednesday, 04 December 2019 11:11

Argon regulator for pipe purging systems

Dramatic savings can be achieved when welding stainless and chromium steels and also titanium alloy tube and pipes with the use of an Inflatable Pipe Purging System.

By restricting weld purging zones, Inflatable Pipe Purging Systems achieve a huge saving in time waiting for pipes to be completely filled with argon, purged down to a low enough oxygen level to start welding safely and also the cost of using a large amount of inert gas.

2019 12 04 111005

To avoid such risks and to see that the inert gas being delivered to the pipe purging system is controlled, Huntingdon Fusion Techniques HFT® have designed and developed PurgeGate®, a unique valve which regulates the pressure and flow of gas that is passed through the system, ensuring that it will not burst regardless of the pressure and flow rate.

Ron Sewell, Chairman for HFT® said: “Purging larger diameter pipes has never been easier. PurgeGate® has found valuable applications in the welding industry where inflatable devices are used for weld purging of tubes and pipes. Setting flow rates and pressures on gas regulators can be interfered with. The pressure inside a purge system can also rise dramatically during a welding sequence, to create a burst. If inflatable devices burst during a tube or pipe weld sequence then the loss of protective gas can result in a highly expensive and extremely inconvenient weld repair.”

PurgeGate® is a low cost, reusable accessory that has been designed and constructed to pass a maximum of 7.5 litres/min and 0.5 bar pressure. Other versions of 1 bar and above are also available.

PurgeGate® is fitted as standard on HFT®’s QuickPurge® and HotPurge® Tube, Pipe and Pipeline Weld Purging Systems and is an optional extra for their lower cost PurgElite® series. PurgeGate® is designed to fit on all brands of Pipe Purging Systems and the valve can easily be moved from system to system.

Made in Wales – Manufacturer of the Year 2019!

Huntingdon Fusion Techniques HFT® have a Worldwide Exclusive Distributor Network.

Published inProduction
Thursday, 24 October 2019 09:36

Heavy-Duty Pipe Blocking with Steel Plugs

Heavy-duty pipe blocking and stopping is easy with the Steel Plugs Range from Pipestoppers®.

Pipestoppers®, a division of Huntingdon Fusion Techniques HFT®, manufacture Steel Plugs, which have been the favoured heavy-duty plug for applications such as leak testing, pipe stopping and blocking for their sealing effectiveness and durability.

HFT Pipestoppers® Steel Plugs can be used for low pressure testing and plugging all pipes, pipelines and pipe work between 2 to 48” (50 to 1,200 mm) diameter.

2019 10 24 093616

Luke Keane, Technical Sales Manager for HFT® said: “Plugging challenges are a thing of the past with our Steel Plugs range. They provide a strong, leak-free seal with each plug having a long life span.”

“Where plugs might be required to work close to the top of their pressure range and to hold seals longer than would be the case with single plugs, we also manufacture Double Steel Plugs, which increases the capability of the plug.”

Specifically designed for heavier duty applications, the Steel Plugs can be immersed in water for long periods of time, can be used at higher temperatures and can be used in acidic or alkaline environments.

2019 10 24 093733

The HFT® Single and Double Steel Plugs are available with sealing rings made from viton, silicone, neoprene, nitrile or natural rubbers for resistance to different temperatures and chemicals.

The Pipestoppers® Division at Huntingdon Fusion Techniques HFT® supplies a range of Mechanical and Inflatable Pipestoppers® and Plugs to suit every application.

Huntingdon Fusion Techniques HFT® have a Worldwide Exclusive Distributor Network.

More information

Published inEquipment
Wednesday, 25 September 2019 10:15

Low Cost Weld Purge Dams

Weld Purging short pipe pieces and dome-end welds where tandem Inflatable Tube and Pipe Purging Systems are unsuitable, Huntingdon Fusion Techniques HFT® manufactures Weld Purge Dams.

Ron Sewell, Chairman for HFT® said: “When welding tubes and pipes, the most cost- effective solution is to restrict the volume, usually with a Tandem Weld Purging System, especially welding metals such as stainless steels, titanium and zirconium.”

2019 09 25 101451

“Where Tandem Weld Purging Systems are unsuitable, Weld Purge Dams are available for pipe diameters from 6 to 88” (150 mm up to 2,235 mm) and offer a low-cost alternative to foam or cardboard dams that are still frequently handmade by welders on site. Unsuitable materials can often lead to rework of some kind and in worst cases cause welds to be rejected. Displacing the oxygen with an inert gas before, during and after welding helps to create welds that are free from oxidation. However the Weld Purge Dams should be made of materials that do not outgas water vapour or any other undesirable gases.”

Weld Purge Dams are manufactured with four pull tags located around the circumference, thus providing ease of positioning and retrieval. They are fitted with a dual inflation and purge hose, an additional purge gas hose and an exhaust vent which can be connected to one of the HFT® Weld Purge Monitors®. The additional purge gas hose is suitable for introducing extra purge gas into the weld zone at any time to cool welds, to meet interpass temperature specifications, or to provide more inert gas in the event of titanium, zirconium or special stainless applications needing a guaranteed zero colour weld.

Apart from the benefit of having a metallurgically sound weld, the difficulties of cleaning an oxidised weld are eliminated, saving vast amounts of money in labour and material costs as well as the disposal costs when pickling acids are used. Now there is no more reason to put welds at risk by using cheaper unsuitable materials, when for a very low cost Argweld® Inflatable Weld Purge Dams can be purchased instead!

Huntingdon Fusion Techniques HFT®’s White Paper: Single Ended Purge Dams is available to read on their website: https://www.huntingdonfusion.com/index.php/en_gb/technical-support/white-papers-40017/2868-wp-207-single-ended-purge-dams

Published inProduction
Sunday, 08 September 2019 16:13

Oxygen Monitor for Welding

Inert gas welding requires the elimination of oxygen from the weld zone during the welding of reactive metals including stainless steel.

2019 09 08 160752Before the welding process begins, the oxygen level must be reduced to a required minimum, which is less than 100 ppm when welding stainless steel.

The low cost, hand held, battery operated PurgEye® 100, designed and developed by Huntingdon Fusion Techniques HFT® is perfect for obtaining zero colour, oxide free welds in stainless steel, reading accurately from atmospheric oxygen level (20.94%), right down to 100 ppm (0.01%).

The PurgEye® 100 is IP65 rated and comes with long life sensor, leak-tight push buttons, auto calibration and a vacuum-sealed leak-tight probe assembly. The monitor has a clear, easy to read LCD screen with features such as a low battery icon as well as the low sensor icon. When the monitor is not in use, an automatic sleep mode activates to conserve battery life.

2019 09 08 160815The Weld Purge Monitor® was invented by HFT® in the 1970s and with over 40 years of innovation, design and manufacturing experience, the company now has a Family of PurgEye® Weld Purge Monitors® to measure oxygen levels from atmospheric content (20.94%) down to 1 ppm (accurate to 10 ppm).

Ron Sewell, Chairman for HFT® said: “All of Huntingdon Fusion Techniques HFT®’s Weld Purge Monitors® and Inflatable Tube, Pipe and Pipeline Weld Purging Systems are manufactured in the UK. We do not sacrifice on quality. We guarantee to help you achieve zero colour welds, time and time again.”

It is important not to use alternative low cost oxygen analyzers or other oxygen safety monitors as they are calibrated under ambient conditions and therefore unsuitable for measuring purge levels down to 0.01% as the PurgEye® 100 does.

2019 09 08 160835

Huntingdon Fusion Techniques HFT® have a Worldwide Exclusive Distributor Network.

More information

Published inProduction

Thoriated tungsten electrodes are still widely used in GTAW/TIG welding despite the potential health hazards. Thoria is added primarily to stabilize the arc but it is radio-toxic and radio-toxic dust is generated during electrode grinding.

2019 07 26 112542

To overcome the risk posed by harmful products Huntingdon Fusion Techniques HFT®’s blue-tipped MultiStrike® Tungsten Electrodes contain a mix of rare earth stabilizing compounds without thoria and are thus radio-toxic free. They also offer a life extension of up to ten times that of other stabilized electrodes.

Each packet comes with a traceability number to ensure that companies with a quality control procedure have traceability over another aspect of their joining processes.

MultiStrikes® can be used for welding aluminium with the AC process, as well as steels and alloys with the DC process, which allows the welder to have just one type of Tungsten Electrode to weld all materials and reduce the amount of stock and purchasing requisitions.

MultiStrike® Tungsten Electrodes demonstration video is available on our YouTube Channel.

Huntingdon Fusion Techniques HFT® have a Worldwide Exclusive Distributor Network.

More information

Published inProduction

A south-west Wales manufacturer is on track to secure a game-changing £1 million export deal in Central Asia which is set to propel its business growth.

Huntingdon Fusion Techniques (HFT), based in Burry Port, Carmarthenshire, is a leading inventor, designer and manufacturer of weld purging technology designed to remove oxygen from welds on pipes and tubes made of stainless steel or similar materials to prevent their oxidisation, discolouration or corrosion. The process improves corrosion resistance and protects the joint strength of the pipes and tubes.

The firm, a former finalist in the Welsh Business Awards’ ‘Success in Overseas Trade’ category, is close to securing a £1 million deal which will see its products used in a multi-billion-pound project to build a new, onshore gas facility in the oil and gas rich country of Kazakhstan.

Georgia Gascoyne, CEO of weld purging technology manufacturerGeorgia Gascoyne, CEO of weld purging technology manufacturer

The deal would mean the creation of additional jobs and a possible need for additional warehousing.

The project is the latest in a line of export contracts for the manufacturer which exports its products to more than 45 countries across the globe.

Georgia Gascoyne, CEO and Managing Director of HFT since 2013, said: “Over the last 10 years we’ve experienced significant growth due to the ease of exporting. Some 80% of our business is export now and this deal in Kazakhstan will provide a major boost for us.

“It’s an international project, backed by US oil companies, with many contractors working on it. We’ve been making presentations in regard to this project for three to four years but we’re expecting to hear a final decision in the next couple of months. It’s a game-changer for us in terms of manufacturing and administration.

“It will bring a number of employment opportunities including potential roles for a project manager and assistant and maybe even two or three manufacturing positions.”

Established in 1975 in Cambridgeshire before moving to Wales 15 years ago, HFT deals mainly with the oil and gas, nuclear energy, shipbuilding and process industries. The company sells its products through a network of international distributors and currently has 40 distributors worldwide in markets such as Australia, North and South America, the Middle East and Europe.

Support from the Welsh Government has been key to HFT’s export growth, helping the firm to secure its attendance at trade exhibitions which have led to contracts being secured in Turkey and Japan within the last 12 months.

Georgia explained: “Our turnover has been up 6% to 8% a year for the last five years thanks to our export focus. We’ve recently established a new operative in Turkey through trade exhibitions in the country and have entered markets in Japan thanks to a Welsh Government trade mission we attended in October 2018, where we picked up orders straightaway.

“Japan was a market we had dabbled in previously, with a couple of customers there but we wanted to expand our activities there. When the opportunity arose to travel to the country last year with Welsh Government, on an arranged trip surrounded by industry peers, it made sense. The trip was a great success and we’re returning to Japan in the next couple of months.

“Japan is a difficult market to crack but we seem to have broken into it. We have more work to do but we’re on the second rung of the ladder.”

Published inProcessing
Wednesday, 24 January 2018 07:35

Bright, shiny, oxide-free welds with PurgExtra®

Tubes and pipes made from titanium, stainless steel, chrome/nickel steels are mostly required to be welded in a non-oxidised environment in order to achieve a metallurgically correct, zero colour weld. Best results are obtained by reducing the volume to be purged, with an inflatable Weld Purging System.

Leading the way in Weld Purging Technology, Huntingdon Fusion Techniques HFT® have developed PurgExtra®, for purging tube and pipe joints from 1 – 24” diameter that provide an extra gas purge hose to speed up the purging process even further.

Additional advantages of this design improvement are that the operator can use the extra purge gas supply for welding reactive metal joints in particular, such as those made from titanium and zirconium. In addition, the extra gas can be used for cooling welded joints faster than normal, where permissible.

PurgExtra APBM PHO 3C PurgExtra with Helmet Torch

Luke Keane, Technical Support for HFT® said: “The PurgExtra® Range complements the PurgElite® Series that has a single purging inlet and is more appropriate for stainless steel only. PurgExtra® however, allows the operator to purge at the recommended rates initially and then, when conditions are correct, to introduce the additional gas at high flow rates. This system is especially valuable for achieving the lower oxygen levels required for welding materials around 20 parts per million.”

When welding joints where interpass temperature control is necessary, PurgExtra® allows extra argon gas into the welding zone, helping to cool the weld zone dramatically.  The extra gas also helps to remove the gases that are expelled by the outgassing, which occurs as the metal is being heated. The extra gas flow will prevent these expelled gases from combining with the hot metal and oxidising, which would otherwise cause the metal to discolour and lose its corrosion resistance and possibly introduce defects that would cause loss of joint integrity.

PurgExtra® comprises two inflatable dams connected by a heat resistant, highly flexible gas hose that has the unique IntaCal® gas release system. IntaCal® allows the dams to be inflated correctly and then releases the inert gas to safely purge the space between the dams. The low profile IntaCal® Valve replaces the old fashioned, bulky complicated valves and eliminates the need to make adjustments to flow rates.

The highly flexible spinal hose between the inflatable dams allows the PurgExtra® Systems to be pulled or pushed easily around bends and elbows. In the centre of the spinal hose a strip of RootGlo® material is adhered, allowing the welder to see clearly through the root gap, when the system has reached the correct position in the pipe. RootGlo® can be charged by exposing it to daylight for 10 minutes, after which it will provide up to 24 hours of bright illumination inside the pipe.

The innovative PurgeGate® Valve may be fitted to the PurgExtra® Systems as an accessory, to protect the inflatable dams from bursting due to accidental over pressurisation.

Heat Resistant Covers are also available for PurgExtra®, which fit onto the inflatable dams and allow operation with pre-heated and post-weld heat-treated pipe joints where the temperatures might reach 760°C.

The HFT® Weld Purge Monitors® are used to give precise oxygen values throughout the purging process.

Huntingdon Fusion Techniques HFT® are Weld Purging Innovators, Designers and Manufacturers with offices located globally.

Huntingdon Fusion Techniques HFT® invented the ‘Weld Purge Monitor®’ in 1975 and own all international intellectual property rights and registered trademarks.  

Weld purging is the act of removing, from the vicinity of the joint, oxygen, water vapour and any other gases or vapours that might be harmful to a welding joint. Such gases may combine with the metal to form undesirable compounds that may reduce corrosion resistance or may be instrumental in creating cracks or other structural defects in metals.

Published inProcessing

Tungsten is a rare metallic element used for manufacturing gas tungsten arc welding (GTAW) electrodes. Tungsten Electrodes are available in a range of sizes and lengths and are made up of either pure tungsten or an alloy of tungsten and other rare-earth elements and oxides. Choosing an electrode depends on the base material type and thickness and whether you weld with alternating current (AC) or direct current (DC).

2017-03-03 081608

Each electrode is color-coded at the tip to eliminate confusion over its type. Unlike the red-tipped thoriated Tungsten Electrode, which contain 2% thoria, Huntingdon Fusion Techniques HFT®’s blue-tipped MultiStrike® Tungsten Electrodes contain a mix of non-radioactive rare earth elements, eliminating the risk to health posed by thoriated Tungsten Electrodes.

A customer in the UK recently said: "We have tested your MultiStrike® under production conditions where we need to make short lengths welds using the TIG process. On a batch of 50 components only 2 light re-grinds were required compared to 7 heavy regrinds when using thoriated electrodes. Even when the welder occasionally touched the work with the electrode there was no material change in performance whereas we would normally expect to have to re-grind. Better weld quality and finish was observed. We were particularly impressed with the health and safety aspects and have taken the decision to remove all thoriated electrodes from site."

2017-03-03 081626

MultiStrikes® can be used for welding aluminium with the AC process as well as steels and alloys with the DC process, which allows the welder to have just one type of Tungsten Electrode to weld all materials and reduce the amount of stocks and purchasing requisitions.

Other tungsten electrodes work at higher temperatures so their oxide additions (mostly radioactive) burn out, or evaporate much faster than those non-radioactive ingredients in MultiStrike®, so much so that they give at least 10 times more arc striking capacity of other tungsten electrodes, when tested under the same conditions.

With most tungsten electrodes in use still containing radioactive and carcinogenic 2% thorium oxide, MultiStrike® provide the TIG and Plasma welder with a safe and superior alternative.

Each packet comes with a traceability number to ensure that companies with a quality control procedure have traceability over another aspect of their joining processes.

MultiStrike® Tungsten Electrodes demonstration video is available at: https://youtu.be/bx1BeepVMaw

Huntingdon Fusion Techniques HFT® have a worldwide Exclusive Distributor network, which can be found at www.huntingdonfusion.com

Huntingdon Fusion Techniques HFT® are Weld Purging Innovators, Designers and Manufacturers with offices located globally

Published inProcessing

Weld Butts in Pipe Diameters up to 80” diameter can now be purged using the Argweld® QuickPurge®II Inflatable Pipe and Pipeline Weld Purging Systems.

quickpurge 2

QuickPurge®II Pipe Weld Purging Systems have been designed to dramatically reduce weld purging times and deliver bright shiny oxide free welds irrespective of the size and the volume of the pipe.

A central  collar between the two inflatable dams reduces the volume  to be purged to a small annulus.

Around the centre of the collar is a piece  of ‘RootGlo®’ illuminating strip that  allows operators to see the centre of the purging system. RootGlo®  holds its illuminating charge for 24 hours after which it can be recharged simply by exposing it to daylight for ten minutes.

quickpurge 2 1

The PurgeGate®  accessory is fitted to all QuickPurge®II Systems. PurgeGate®  is a special device  that prevents the purge gas  input pressure to the Inflatable Pipe Weld Purging System from rising above 7.5 psi.

Even in the event that the gas pressure rises suddenly to 50 psi by error, only 7.5 psi can be allowed through  to the inflatable dams so they are unlikely to burst due to over inflation.

Another new development from the HFT development team is the IntaCal®specially developed purge  valve  that does not need setting like previous systems.

So inert gas is fed into the PurgeGate® system which then passes through at 7.5 psi or less to the IntaCal® valve which allows inflation of the first dam, after which inflation of the second dam takes place before surplus purge gas is passed into the purge void to eliminate air from the trapped cavity.

Using a Weld Purge  Monitor®, engineers can ascertain exactly when the amount of oxygen has been reduced to an adequate level for their applications.

Because of the low vapour pressure materials that have been selected for QuickPurge®II, it is possible with these System to reach an oxygen level of better than 10 ppm to ensure that bright shiny welds are created.

Even  with this significantly  reduced annulus having  been designed, QuickPurge®II Systems are manufactured in sizes of 6” (150 mm) diameter and upwards to 96” (2440 mm).

Published inProcessing

Thick wall chrome steel pipe joints, as used in the power industry for high pressure high strength pipe work, need to be pre-heated for welding and probably need a post weld heat treatment too.

hotpurge imt

Weld joints of this nature need to be purged of oxygen and welded in an inert gas atmosphere, to prevent oxidation, slag formation etc., that leads to loss of corrosion resistance and undesirable change to the metallurgy.

With the high temperatures and length of time at temperature needed in the pre-heat, weld and post heat treat cycles, most weld purging systems are unsuitable.

However, Huntingdon Fusion Techniques, HFT®, has now developed “HotPurge™” Pipe Purging Systems, for use up to 300ºC (572ºF) for 24 hours. (The material used is rated up to 700ºC (1,292ºF)

HotPurge™ is based on the company’s world famous Quick Purge®II design that has been in wide use for many years, but adapted for use at high temperatures.

This system is available for pipe internal diameters (i.d.) from 4 – 96” (100 – 2,500 mm). Each Hotpurge™ is made to size and has a tolerance of +/- ½” (12 mm) because of the restrictions of heat proofing material.

Features of the HotPurge™

1.0 The central large collar that dramatically reduces the space to be purged and makes it easier to reach the lower oxygen levels faster.

2.0 Four pull handles are securely attached to each dam, secured with the Kevlar thread that will withstand a pulling force of 1.000 lbs on each handle.

3.0 The most stunning feature of the the HotPurge™ system is the PurgeGate® to prevent over inflation.

purgegate imt

PurgeGate® is a clever, world wide patented invention that allows users to simply connect the Hotpurge™ system to any source of compressed inert gas and simply turn it on to whatever flow or pressure they wish.

PurgeGate® will protect the dams from over inflation or bursting and allow the user to deliver whatever flow they like, using the one gas source.

No matter how high the user raises the pressure in order to deliver more flow, PurgeGate® prevents the pressure going to the inflatable dams, but allows the increased flow to make a faster purge.

PurgeGate® is guaranteed for life.

HotPurge™ Pipe Purging Systems can be used over and over again for specialist weld purges on power industry piping, that will keep the oxygen levels below 100 parts per million throughout the welding cycle.

Published inProduction
Monday, 02 December 2013 22:51

Return on Investment with the QuickPurge® II


For a stainless steel pipe welding job with just under 17,000 joints from 6 – 36” diameter, it was found that a gas savings of almost 7 million litres of Argon were made, when comparing old fashioned weld purging products with modern day products like the QuickPurge® II System.


A return on investment document has been created showing savings, weld by weld, so that operators can extrapolate to make their own calculations.

With such dramatic savings, operators can apply their own Argon or Helium gas costs to assess the savings that they could make with the QuickPurge® II system.

The full ROI (Return on Investment) analysis document is available on request from Huntingdon Fusion Techniques Limited.


Published inProduction
Tuesday, 24 September 2013 09:00

QuickPurge® II - Huntingdon Fusion Techniques

Coinciding with Fabtech 2013 in Chicago, Huntingdon Fusion Techniques (HFT®) is launching the most revolutionary Pipe Weld Purging System ever QuickPurge® II.

purge imt

The original QuickPurge® concept was devised between HFT® and Mitsui Babcock just over ten years ago for the Isle of Grain stainless steel pipeline across the south of England.

Now, after the phenomenal success of this concept of weld purging, HFT® has added a whole new raft of improvements.


Probably the most significant development ever for inflatable weld purge systems is PurgeGate™. This extremely clever device will prevent the inflatable dams from ever bursting due to over inflation. In the real world of pipe and pipeline weld purging, operators come and go and the opportunity to read instruction manuals rarely arises. Technicians will therefore look at weld purging systems, assess how easy they think it is to use them and will inevitably over inflate and burst dams at some time or other.

Now PurgeGate™ eliminates this problem entirely.

No matter how much pressure or flow the operator puts into the system, PurgeGate™ will deliver the right amount, eliminating the need for setting up, trials and probably the bursting of dams at some time or other.

Low volume annulus

With new heat resistant materials, it has been possible to create a lower volume annulus between the inflatable dams, so that the space to purge has been further decreased leading to faster purge times.

Now with PurgeGate™ and the new heat resistant materials, welders can have their joint purged and ready for welding before welders with other weld purge devices have even finished their set-up procedure.

Extra Purge Gas Hose

QuickPurge® II sizes up to 20 inch diameter are provided as standard with three hoses.

- The inert gas inflation and purge hose (black)

- An auxiliary purge/exhaust hose (blue) and

-   A 6mm polycarbonate tube (red) that can be connected directly to the Weld Purge Monitor®

For pipe diameters about 20 inch, the systems have:

- the inert gas inflation and purge hose (black)

- two auxiliary purge/exhaust hoses (blue) and

- a 6mm polycarbonate tube (red) that can be connected directly to the Weld Purge Monitor®

For weld purge readings that can be taken from the end of the QuickPurge® II system, the red tube on the Weld Purge Monitor® should be joined to the red tube on the QuickPurge® II by a single quick fit connection thus avoiding the leaks that are so common with other systems having to adapt connections and that lead to erroneous readings.

(The residual oxygen readings are mostly taken through the root gap using the manual pump connected to the Weld Purge Monitor®).*

New Materials

As mentioned previously, HFT® has chosen new higher temperature resistant materials, for the annulus and ends of dam systems, that are heat resistant up to 700 ºC and the surfaces in contact with the pipe are now covered with a 50% heavier gauge of nylon making them tougher to resist tearing and giving good friction free travel characteristics when being pulled through pipelines and pipe assemblies.

All older and inferior yellow and red materials have now been replaced and the only genuine

QuickPurge® II Pipe Weld Purging systems are those with the grey and black materials.


Previously, there was only a small length of RootGlo® luminescent material placed on the topside of the Quick Purge systems for alignment purposes.

However, now with QuickPurge® II we have been able to place the RootGlo® material all around the circumference, to give welders the ability to align the QuickPurge® II system from any position around the pipe.

In addition this extra high degree of light allows welders to see all parts of the weld root through the remaining joint gap.

RootGlo® gives off its luminescence for up to 12 hours and recharges when in daylight.

Although the material is expected to last the life of the QuickPurge® II systems, if the performance does deteriorate, the RootGlo® material can be quickly and easily replaced.


Working hand in glove with PurgeGate™, IntaCal® produces the correct flow rate to inflate both inflatable end dams equally, offering a great improvement over earlier models where one dam inflates before the other, increasing the purge time unnecessarily.

As the operator turns on the inert gas supply valve to the recommended level or above, IntaCal® and PurgeGate™ deliver only the flow and pressure necessary for fast but gentle inflation and purging.

Pull Loops

Each end of every QuickPurge® II system is fitted with four pull loops for precise positioning and pulling into position. Each loop is double stitched with high temperature, very strong Nomex thread that allows a breaking strain of 1,000 lbs (446 kg) per loop.


QuickPurge® II has been designed and manufactured with greater flexibility in mind. These systems can now be dragged around and set up in 90º bends, something that has been impossible previously.

QuickPurge® II joins the family of inflatable pipe purging systems, including the PurgElite® Tube and Pipe Purging range from 1 – 24” systems, the HotPurge™ inflatable pipe purging systems for pre-heated pipework, capable of resisting temperatures up to 700º C (1300ºF) for 24 hours and the Argweld® single ended inflatable purge dams.

This family of systems will typically be suitable for welding all stainless and duplex steels, chrome steel pipework such as P91 and P92 etc, nickel alloy pipework, titanium pipework and even aluminium and carbon steel when extra high quality is required from welded joints.

Ten years on, from the original development for the Isle of Grain, LNB pipeline, in August 2013, there was a call from a contactor working on the Isle of Grain LNG site, who had been suffering from the bursting of inflatable dams, from an inferior product supplied by a Welding Product reseller.

It seems that the LNG contractors there had stopped using HFT® systems and had brought cheaper copies from another Company.

As the cheaper supplier was unable to help with the problem, the contractor contacted HFT® who

sent a technician the next day with replacement product fitted with PurgeGate™.

Samples tested positive and the Company was thrilled with the addition of PurgeGate™ and is going to purchase from HFT® once again.

Interesting how a new demonstration has completed a circle after all these years from original design and supply to replacing a cheaper alternative.

* On the spot purge quality readings may be taken through the pipe root gap using a hand pump or a Weld Purge Monitor® with an electric pump.

Continuous, high quality purge readings can be made inside lengthy pipe runs at the immediate exhaust point using the ‘Torpedo’ unit attached to the Weld Purge Monitor® at distances up to several hundred metres if required.

Published inEquipment